Linear Mega code wireless MDKP ACP 00878
The MDKP wireless keypad can transmit a unique signal for each 1-6 digit PIN code entered. It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions. It generates a separate transmission code for each user selectable 1-6 digit PIN. Codes are learned by the access controller or receiver, either the maximum number dependent upon the model used. For instance, if the controller is the AP-3, the MDKP can generate 338 unique codes.
To operate the MDKP, a user simply enters a PIN followed by the # key, and the code is transmitted to the receiver for validation. Downlighting can be turned on by pressing the # key twice; it remains on for 30 seconds or until a code is sent. Installation and set-up are simple. The MDKP can be mounted on either a wall or a gooseneck. It is ready to use upon plugging in its 9 V lithium battery and programming of user codes.
Click here for programming instructions.
Linear Mega code AKR-1 Linear Digital Keypad/Receiver
The Model AKR-1 Exterior Digital Keypad with Radio Receiver is a digital entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics.
Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs.
Akr-1 Programming Instructions (click here)
Leather case for mini remotes
Does the plastic ring on your mini remote or key less entry remote keep breaking?
Try a leather case for your remote.
Comes with a sturdy metal ring for attachment.
Linear AM-PR Proximity Reader ACP00740 **Obsolete - now use AM-DPR**
The Model AM-PR Proximity Reader is designed for use with Linear's access control systems. This close-range, reader works with either proximity tags or proximity cards. The AM-PR is rugged, rated for extreme weather, and vandal resistant. **Obsolete - now use AM-DPR (ACP00961)**
Linear AM-PC Proximity Card ACP00739
The Model AM-PC Proximity Card is a Wiegand format proximity type access control card with a slot for attaching to a key ring, use with AM-PR proximity reader, sold in lots of 25.
Linear AM-PT Proximity Tag ACP00742 [lot of 25]
The Model AM-PT Proximity Tag is a Wiegand format proximity type miniature access control tag with a slot for attaching to a key ring, use with AM-PR proximity reader, sold in lots of 25.
Linear AM-DPR Proximity Reader ACP00961
The Model AM-DPR Dual Proximity Reader is designed for use with Linear's
access control systems. This close-range, reader works with either
proximity tags or proximity cards. The AM-DPR is rugged, rated for
extreme weather, and vandal resistant.
Linear Mega Code MGR-2 dnr00105
The MGR-2 is a 2-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The MGR-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the MegaCode radio format with over a million possible code combinations. Up to 40 transmitters can be programmed into the receiver.
Stores up to 40 MegaCode transmitters
Auto voltage sensing - no jumpers to set
Two Form "A" (normally open) relays rated at 30 Volts AC/DC up to 5 Amps each
Supplied with whip antenna, three feet of coaxial cable, and bulkhead connector
Power: 12 - 30 VAC or 10.5 - 30 VDC
Dimensions: 3.625 x 5.25 x 1.5 inches.
Linear MGR-2 Programming Instructions (click here)
Open your Garage Door, Gate or Entry Door with your Smatphone.
Works with Blackberry ,IPhone or Droid
Garage door automatic closer
Ever wonder if you left your garage door open?
The GT-100A closes your garage door automatically if you accidentally leave it open.
Easy to override if needed.
Click here for programming instructions.
For Liftmaster, Chamberlain or Sears units made after 1998 use 888LM panel instead
This unit not for use on units with MyQ technology