Doorking 1515-080 Digital Keypad This is a digital keypad in a steel housing with locking steel faceplate. The keypad will accept 400 different programmable codes.

Doorking 1515-081 Digital Keypad This is a digital keypad in a steel housing with locking stainless steel faceplate. The keypad will accept 400 different programmable codes.

Doorking Digital Keypad This is a digital keypad in a steel housing with locking stainless steel faceplate. The keypad will accept 2 different programmable codes. Doorking 1503 Installation Manual (click here)

Doorking Digital Keypad This is a digital keypad in a steel housing with locking stainless steel faceplate. The keypad will accept 2 different programmable codes. Doorking 1503 Installation Manual (click here)

(1)

The 1506 Series provides access control for virtually any application where stand-alone digital code entry is desired. These vandal resistant keypads use stainless steel faceplates, galvanized steel sub-plates and are housed in a rugged steel cabinet. Standard style units can be surface or post mounted and flush mount units are designed to be recessed into a wall or column. The 1504 Series adds and intercom sub-station that can be connected to a master intercom station. Doorking 1506 Installation Instructions (click here)

The DKS 1500 series family of keypads provides access control for virtually any application where digital code entry is desired and they are available for stand-alone applications or for connection to an access controller. These vandal resistant keypads (except 1509) use stainless steel faceplates, galvanized steel sub-plates and are housed in a rugged steel cabinet. The 1503 and 1506 series keypads are available in surface or flush mount styles. The 1509 is designed for indoor applications and mounts in a single-gang electrical box. The 1504 model adds an intercom substation to the 1503 or 1506 series allowing voice communication via connection to a master intercom station.
Click here for brochure.

Doorking 1506-081 secondary slave keypad to be used with 1506-086


Doorking 1506 Installation Instructions (click here)

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Ak-11 Programming Instructions (click here)

(3)

The Model AK-2W Weather-resistant Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. ak-2w Programming Instructions (click here)

(1)

The Model AK-31 Interior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged, plastic enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. ak-31 Programming Instructions (click here)

The EMX KPX 100 is a dual relay output, programmable keypad. With its durable back-lit, all metal key buttons and a rugged metal housing.

(1)

EMX CR2000 Waterproof Wiegand Card Reader & Keypad
Uses CARX-20 cards click here to view

The iei 212w indoor/outdoor single door access control keypad.
The w style keypad mounts to most standard single-gang electrical back boxes.

Proximity Keypad  and card Access Control PRX-320 by EMX  water proof (uses carx-20 cards sold separately)

Proximity cards for use with  prx-320 and CR2000  car reader systems

The Model AM-KP keypad is designed for use with Linear's access control systems. The keypad is housed in a rugged cast aluminum enclosure. The die-cast keys have bright, easy-to-read yellow graphics. Each key has a positive tactile click feel when pressed. An internal sounder signals when a key is pressed.

The MDKP wireless keypad can transmit a unique signal for each 1-6 digit PIN code entered. It has a built-in radio transmitter with a 250-foot range in line-of-sight conditions. It generates a separate transmission code for each user selectable 1-6 digit PIN. Codes are learned by the access controller or receiver, either the maximum number dependent upon the model used. For instance, if the controller is the AP-3, the MDKP can generate 338 unique codes. To operate the MDKP, a user simply enters a PIN followed by the # key, and the code is transmitted to the receiver for validation. Downlighting can be turned on by pressing the # key twice; it remains on for 30 seconds or until a code is sent. Installation and set-up are simple. The MDKP can be mounted on either a wall or a gooseneck. It is ready to use upon plugging in its 9 V lithium battery and programming of user codes.
Click here for programming instructions.

(1)

The Model AKR-1 Exterior Digital Keypad with Radio Receiver is a digital entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs.
Akr-1 Programming Instructions (click here)

Elite Keypad EK485

Sentex Digital Keypad - This is a digital keypad in a steel housing with stainless steel faceplate. The keypad will accept 500 different programmable codes.

(1)

Linear 2000eM Style Flush-mount Durable Metal Access Control Keypad

Liftmaster KPW250 wireless keypad 250 code
Works with most Liftmaster units 390mhz, 315mhz, Security 2.0
Also compatible with Multi Code 300Mhz systems
** Metal case

Liftmaster KPW250 Programming Instructions

(4)

The DKS 1500 series family of keypads provides access control for virtually any application where digital code entry is desired and they are available for stand-alone applications or for connection to an access controller. These vandal resistant keypads (except 1509) use stainless steel faceplates, galvanized steel sub-plates and are housed in a rugged steel cabinet. The 1503 and 1506 series keypads are available in surface or flush mount styles. The 1509 is designed for indoor applications and mounts in a single-gang electrical box. The 1504 model adds an intercom substation to the 1503 or 1506 series allowing voice communication via connection to a master intercom station.
Click here for brochure.

Doorking Digital Keypad & Intercom This is a digital keypad in a steel housing with locking stainless steel faceplate. The keypad will accept 2 different programmable codes. It also includes a speaker and call button to be connected through an intercom system. Other intercom parts are not included with this unit.
***add Aiphone C-123L/A intercom kit to create complete system***

(1)

The DKS 1500 series family of keypads provides access control for virtually any application where digital code entry is desired and they are available for stand-alone applications or for connection to an access controller. These vandal resistant keypads (except 1509) use stainless steel faceplates, galvanized steel sub-plates and are housed in a rugged steel cabinet. The 1503 and 1506 series keypads are available in surface or flush mount styles. The 1509 is designed for indoor applications and mounts in a single-gang electrical box. The 1504 model adds an intercom substation to the 1503 or 1506 series allowing voice communication via connection to a master intercom station.
Click here for brochure.

The DKS 1500 series family of keypads provides access control for virtually any application where digital code entry is desired and they are available for stand-alone applications or for connection to an access controller. These vandal resistant keypads (except 1509) use stainless steel faceplates, galvanized steel sub-plates and are housed in a rugged steel cabinet. The 1503 and 1506 series keypads are available in surface or flush mount styles. The 1509 is designed for indoor applications and mounts in a single-gang electrical box. The 1504 model adds an intercom substation to the 1503 or 1506 series allowing voice communication via connection to a master intercom station.
Click here for brochure.

Doorking Digital Keypad & Intercom Flush mount to be built into a wall
This is a digital keypad in a steel housing with locking stainless steel faceplate. The keypad will accept 2 different programmable codes. It also includes a speaker and call button to be connected through an intercom system. Other intercom parts are not included with this unit. ***add Aiphone C-123L/A intercom kit to create complete system***

The DKS 1200 series family of key switches provides access control for virtually any application where simple key switch entry control is desired. These vandal resistant key switches (except 1206) use stainless steel faceplates, galvanized steel sub-plates and are housed in a rugged steel cabinet. The 1206 is designed for indoor applications and mounts in a single-gang electrical box. Mortise key cylinder. Switch can be set for Normally Open or Normally Closed. Mounts in single gang electric box. Indoor use only.
Click here for brochure.

Aiphone C-123L/A Intercom Kit

Aiphone AJ-LED

Additional Master station and skk-620B transformer  for use with C-123 Kit

Access Sentry System Master Station with door release button
Features:Convenient door entry control system with Door Release button AC transformer (PT-1210N) supplies power for both communication and door strike Desk-top or wall mountable

12V AC 110V AC input Plug-in transformer for LEM-1DL Series and EL-12S Door Release

Aiphone DAK-2S Dual Master Adapter For LEM & C-ML

(1)

Doorking 1520-083 Stand alone Proximity card reader with 1000 capacity memory chip

Doorking 1508-112 proximity keytags / keyfobs min order 50 pcs and in multiples of 50
ID Teck. These fobs work with the following readers:
1815-215, 1815-216, 1815-217, 1815-218, 1815-230 and 1815-231

Doorking 1508-110 proximity cards min order 50 pcs and in multiples of 50

This is for stock numbering and coding.
If you want to specify custom codes order part # 1508-136

Doorking 1508-136 custom coded proximity cards
min order 50 pcs and in multiples of 50

This is for stock numbering and coding.
If you want to specify custom codes order part # 1508-136

Doorking 1838 Access Plus Controller  100 capacity

Doorking 1838 Access Controller  3000 capacity

Doorking 1513 Keypad for use with Access Plus system
Digital Keypad Lighted RS-485 - To be used with "ACCESS PLUS" product line
Note:  This is not a stand alone use

Doorking 1815 Keypad for use with Access system
Digital Keypad Wiegand Lighted - To be used with 1833, 1835, 1837, 1838 products
Note:  This is not a stand alone use

Doorking 1815-230 Proximity Card reader on housing for use with Access Plus system
Note:  This is not a stand alone use (see 1520-083 for stand alone)

10-4002-008 SmartPass4 ATA Protocol RS232/Wiegand Internal Antenna

TransCore's SmartPass 4 is a series of fully integrated, self-contained 915 MHz wireless radio frequency identification (RFID) readers

RT1850SL Transformer 18vac-50va

The AT5402 RFID Access Control Tag, in conjunction with TransCore Encompass readers, enables
advanced security techniques that ensure a tag’s authenticity while preventing data corruption and/or alteration.

The eGo Plus License plate Tag is a 915 MHz radio frequency programmable, beam-powered,windshield-mounted tag. 26bit weigand

** These are special order are non returnable***
Indicate desired FC code and start number in comment section of order form upon checkout.

The eGo Plus Sticker Tag is a 915 MHz radio frequency programmable, beam-powered,windshield-mounted tag. 26bit weigand
Note will not work on some higher end luxury cars with high metal content in windshields.
** These are special order are non returnable***
Indicate desired FC code and start number in comment section of order form upon checkout.

The eGo Plus Sticker Tag is a 915 MHz radio frequency programmable, beam-powered,windshield-mounted tag. 26bit weigand
Note will not work on some higher end luxury cars with high metal content in windshields.
** These are special order are non returnable***
Indicate desired FC code and start number in comment section of order form upon checkout.

AWID WS-UHF-0-0 Windshield Tag

Note: Minimum order of 50 tags.

** These are special order are non returnable***

Must Note Faciity Code and start number in order comment section of checkout

(1)

The RS 485 conversion board  is used to connect card readers to the 1838 Access plus units.  Each board can handle up to 2 readers at each access point.
Each 1838 can hold 6 conversion boards.

Doorking 1508-129 proximity keytags / keyfobs min order 50 pcs and in multiples of 50

Fire Access Box  provides emergency access to gate. Hinged front cover is padlocked shut, when padlock is cut or removed and cover is opened a switch inside will open the gate and hold it open until door is closed. (padlock not included)

(1)

Fire Access Box Box provides emergency access to gate.
Designed to accept the Knox KS-2 fire dept key switch not included,
Knox key switch is only available from Knox Box company.

Fire department Access Box afb120

Note: Knox  Padlock or Knox Key switch not included it is only available from the Knox Box Company
This is the box only.

(1)

Access doors on the front and the back include a hole for a standard or fire department padlock
Pull the interior T-handle to release the gate chain
    - T-handle is connected to a steel cable that runs from the fire box to the release mechanism
    - Release mechanism is located at the rear end of the gate chain

(1)

Strobe switch Emergency Vehicle Detector

Siren operated sensor emergency vehicle detector 9-30 vac / vdc
SOSG8

Click 2 Enter  Emergency Vehicle Detector by click to enter

The DKS 1200 series family of key switches provides access control for virtually any application where simple key switch entry control is desired. These vandal resistant key switches (except 1206) use stainless steel faceplates, galvanized steel sub-plates and are housed in a rugged steel cabinet. The 1206 is designed for indoor applications and mounts in a single-gang electrical box. Mortise key cylinder. Switch can be set for Normally Open or Normally Closed. Mounts in single gang electric box. Indoor use only.
Click here for brochure.

The DKS 1200 series family of key switches provides access control for virtually any application where simple key switch entry control is desired. These vandal resistant key switches (except 1206) use stainless steel faceplates, galvanized steel sub-plates and are housed in a rugged steel cabinet. The 1206 is designed for indoor applications and mounts in a single-gang electrical box. Ace key cylinder. Switch can be set for Normally Open or Normally Closed. Indoor use only.
Click here for brochure.

The DKS 1200 series family of key switches provides access control for virtually any application where simple key switch entry control is desired. These vandal resistant key switches (except 1206) use stainless steel faceplates, galvanized steel sub-plates and are housed in a rugged steel cabinet. The 1206 is designed for indoor applications and mounts in a single-gang electrical box. Mortise key cylinder. Switch can be set for Normally Open or Normally Closed. Mounts in single gang electric box. Indoor use only.
Click here for brochure.

Two Position Key Control Station On/Off  OUTDOOR

1-BUTTON INDOOR CONTROL STATION

Exit release button in plastic pvc box

2 BUTTON CONTROL STATION Indoor

3 BUTTON CONTROL STATION

(1)

3 BUTTON CONTROL STATION

3 BUTTON CONTROL STATION Outdoor

3 BUTTON CONTROL STATION Outdoor

3 BUTTON CONTROL STATION Outdoor

Two Position Key Control Station with STOP button

Two Position Key Control Station with STOP button (Has BEST Cylinder)

Two Position Key Control Station with STOP button (has U- CHANGE-IT Cylinder)

Two Position Key Control Station with STOP button  OUTDOOR

Two Position Key Control Station with STOP button  OUTDOOR

Two Position Key Control Station with STOP button  OUTDOOR ( has BEST cylinder)

Two Position Key Control Station with STOP button  OUTDOOR (has U-CHANGE-IT cylinder)

Key for Linear Products

30-205-E Red Waterproof Boots

30-105-E Boots Black Waterproof

30-200-E Red Push Button N.C.

30-100-E Push Button N.O.

Gooseneck Post - 2 x 2 black powder coated steel post 42" tall with 12" deflection. Has multi hole configuration plate welded on top for system mounting and steel plate welded on bottom for surface mounting to concrete pad (replaces model G559 and 55-9)

(1)

Doorking 1200-045 Standard Posts Pad Mount
44" tall with 13" arm

(1)

Doorking 1200-046 Standard Gooseneck mounting Posts. In-Ground Mount 64" long

Gooseneck Post - 2 x 2 44" tall bolt in black powder coated steel post

Mounting Plate for KPR2000

Doorking 1818-040 RS232 Programming Cable

Doorking 1815-037 USB to RS232 adapter  to convert Doorking RS232 port to USB connector for current computers

Doorking 1200-080 Transformer box
Holds 4)  20VA size transformers in lockable box

Liftmaster KPR2000 Keypad/Proximity Reader

1520-041 memory chip only  500 cap

Doorking 1895-022 Keypad for 1503 Lighted

(1)