Navigation
    1

  Home > Select Products > Remote Controls > Linear Remotes > Linear Mega Code 318 mhz >

Linear Wiegand Output Receiver WOR ACP00727
WOR
WOR Linear Wiegand Output Receiver WOR ACP00727


 
Product Price: $223.64
Sale Price: $209.99

Availability:: in stock
Product Code: WOR


Qty:

  
Description Technical Specs
 
The Model WOR Wiegand Output Receiver is designed for use as an access control interface for Linearís block coded digital transmitters. The unit receives signals from transmitters, adds a facility code to the data, and sends the information to the Wiegand input of the access control panel via a 5-wire connection.

Several transmitter and receiver options can be set using the unitís dipswitches. Three different Wiegand output formats (26, 30, & 31-bit) are supported. Three receiver options (lockout, hold, & button offset) can be set. Transmitter buttons on multi-button units can be selectively disabled. The facility code is set using 16 dipswitches.

Three antenna types can be used with this receiver. The local whip antenna (supplied) screws directly on to the receiver. The directional (EXA-2000) and omni-directional (EXA-1000) remote antennas attach to the receiverís antenna input via RG-59 cable and a type F connector.

An on-board RADIO RANGE knob allows adjustment of the receiverís gain. It can be set to limit the maximum radio range that the receiver can achieve. Two indicators display the receivers performance and operation. The red RADIO indicator lights when the receiver detects a radio signal. The two color red/green STATUS indicator lights green when the receiver is sending Wiegand data and during the 1-second post receiver lockout timer (if receiver lockout is enabled). The indicator turns red when the receiverís HOLD input (connected to the access control panel) is active. Receiver test points are provided for listening to the incoming signals with an audio amplifier.

The receiver is housed in a weather-resistant enclosure and can be mounted indoors or outdoors. Gaskets and a weather-tight wiring strain relief seal the unit from the elements.
Features
The Model AM-RRR Remote Radio Receiver is designed for use with Linear's access control systems. The AM-RRR functions as a remote device that extends the radio range or supplies localized radio reception. Three antenna types can be used with this receiver. The cabinet mounted type F connector is for connection to the antenna. The local whip antenna (supplied) screws directly on to the receiver's connector. The directional (EXA-2000) and omni-directional (EXA-1000) remote antennas wire to the receiver's antenna connector with type RG-59 cable. An on-board RADIO RANGE knob allows adjustment of the receiver's gain. It can be set to limit the maximum radio range that the receiver can achieve. Two indicators display the receivers performance and operation. The two color red/green STATUS indicator lights red when the receiver is getting DC power and turns green when access is granted to a transmitter. The RADIO indicator lights when the receiver detects a radio signal. It can be used for trouble shooting and verifying system performance. Receiver test points are provided for listening to the incoming signals. The receiver is housed in a weather-resistant enclosure and can be mounted indoors or outdoors. Gaskets and a weather-tight wiring strain relief seal the unit from the elements. Features Provides extended range for radio-based access control system Up to 500 foot radius radio coverage Weather-resistant housing for outside or indoor mounting Optional directional remote or omnidirectional remote antennas Integral radio gain control for adjustment of radio range 2-color status LEDs indicates "power on" and "access granted" Radio LED detects transmission Power supplied by access controller Low voltage cable allows remote mounting without signal loss RF frequency: 318 MHz 4.25" W x 6.25" H x 2.5" D (without antenna)

Share your knowledge of this product with other customers... Be the first to write a review


Browse for more products in the same category as this item:


Select Products > Remote Controls > Linear Remotes > Linear Mega Code 318 mhz