Navigation
    1
You are here: Home > Select Products > Home Automation
Sort By:
Page of 1
LB60Z-1 LB60Z-1: Z-Wave Dimmable LED Standard Light Bulb

The LB60Z-1 is a Z-Wave controllable and fully-dimmable, instant-on LED screw-in light bulb
Installation Instructions

Brochure

Product Price: $29.99
FS20Z-1 FS20Z-1 Z-Wave Isolated Contact Fixture Module

The FS20Z-1 Isolated Contact Fixture Module can be mounted in a single- or multi-gang electrical box to operate loads or control relay-based devices. The relay can be isolated for dry contact applications or powered to switch live loads. This device can operate loads of up to 277v.

Installation Instructions

Brochure

LB65R6Z-1 LB65R6Z-1 Recessed Lighting Retrofit Kit with LED Bulb

The GoControl Bulbz Smart LED Recessed Retrofit Lighting Kit (LB65R6Z-1) fits into 5" or 6" recessed ‘can’ lighting fixtures, replacing old, outdated incandescent screw-in bulbs with clean and attractive, soft-white efficient LED lighting.

Installation Instructions

Brochure

LBR30Z-1 LBR30Z-1 Z-Wave Dimmable LED Indoor Flood Light (BR30 style)

The Bulbz indoor flood light (Model LBR30Z-1) is a Z-Wave light bulb that has the characteristics consumers want in a flood light form factor, with the added capability of remote and automation-system control.

Installation Instructions

Brochure

PD300Z-2 PD300Z-2 Z-Wave Plug-in Dimmer Module

The PD300Z-2 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300Z-2 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module.

Installation Instructions

Brochure

PS15Z-2 PS15Z-2 Z-Wave Plug-in Appliance Module

The PS15Z-2 Plug-in Appliance Module is designed to provide Z-Wave control to a connected load. The PS15Z-2 module is plugged into any standard grounded AC wall outlet, and the appliance or other device is then plugged into the module. Once connected, the appliance/device can be turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times).

Installation Instructions

Brochure

WD1000Z-1 WD1000Z-1 Z-Wave Wall Dimmer Switch

The Wireless Z-Wave wall mount dimmer allows remote ON/OFF control and dimming of connected lights. The smart dimmer switch is easily wired in place of a standard wall dimmer, and requires a Neutral connection. The WD1000Z-1 dimmer has a field replaceable trim ring - the color of the device can be altered with the Trim ring kit model in black, brown, and almond.

Installation Instructions

Brochure

WD500Z-1 WD500Z-1 Z-Wave Wall Dimmer Switch

The WD500Z-1 Wall Mounted Dimmer allows remote ON/OFF control and dimming of connected lights. The Z-Wave Wall Mount Dimmer is easily wired in place of a standard wall dimmer. This device requires a Neutral connection.

The Wall Mounted Dimmer integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).



Installation Instructions

Brochure

WS15Z-1 WS15Z-1 Z-Wave Wall Switch

The WS15Z-1 Wall Mount Switch allows remote ON/OFF control of loads connected to the switch, and is easily wired in place of a standard wall switch.

The Switch integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

Replaceable Trim Ring

The WS15Z-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory.



Installation Instructions

Brochure

WT00Z-1 WT00Z-1 Z-Wave 3-Way Wall Accessory Switch

The WT00Z-1 Wall Mount Accessory Dimmer Switch allows remote ON/OFF control and dimming of lights controlled by associated Z-Wave modules, creating virtual 3-way switches. The WT00Z-1 controls no load directly, so it can be wired anywhere power is available, without the need for a traveler wire.

Installation Instructions

Brochure

WO15Z-1 WO15Z-1 Z-Wave Single Wall Outlet

The WO15Z-1 Single Wall Outlet is wired in place of a standard duplex receptacle. This device allows remote ON/OFF control of loads connected to the bottom outlet (the other outlet remains powered at all times).

This WO15Z-1 Outlet integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

2008 National Electric Code Compliance
The 2008 NEC requires that all new installations of single and multi-family homes install tamper-resistant outlets. The WO15Z-1 is fully compliant with this code.


Installation Instructions

Brochure

WAPIRZ-1 WAPIRZ-1 Z-Wave PIR Motion Detector

The WAPIRZ-1 Wireless Z-Wave passive infrared motion detector (PIR) is a wireless indoor security device designed to sense and report motion activity and transmit alert signals via a Z-Wave network. the PIR comes with a long-life battery, and provides a low-battery alert signal when the battety needs replacement. The PIR also includes a temperature sensor that can trigger an alert based on specific changes to the room’s temperature.

Installation Instructions

target="_blank">Brochure

WADWAZ-1 WADWAZ-1 Z-Wave Door/Window Sensor

The WADWAZ-1 wireless Z-Wave door or window sensor is a two-piece sensor designed to be affixed to a door, window, or other permanent fixture that opens and closes, such as a drawer, safe, or valuables storage cabinet. Once paired with a compatible Z-Wave controller or hub, the sensor will report when the fixture has been opened or closed via wireless Z-Wave transmission.

Installation Instructions

Brochure

WA105DBZ-1 WA105DBZ-1 Z-Wave Siren & Strobe

The WA105DBZ-1 wireless Z-Wave enabled combination sounder/strobe warning device, designed to alert intruders of a security system presence. Once paired with a compatible Z-Wave controller or hub, the sensor can be turned on or off remotely via the Z-Wave controller and network. When on, the sounder emits a very loud 105 dB alert tone and the integrated strobe flashes brightly.

The sounder/strobe is designed to be wall-mounted, and comes with a UL-approved AC plug-in power supply and offers an integrated battery backup, in case of AC power interruption.


Installation Instructions

Brochure

GD00Z-4 GD00Z-4 Z-Wave Garage Door Opener Remote Controller Accessory

The GD00Z-4 Garage Door Opener Remote Controller opens or closes a sectional garage door remotely through a Z-Wave certified Gateway or Security Panel. It is compatible with virtually any automatic garage door opener connected to a sectional garage door. Installers only need to ‘pair’ the unit into the Gateway, mount the unit, connect two wires and plug it in. The GD00Z provides both audible and visual warnings prior to remotely-activated door movement, allowing it to meet UL 325-2010 safety requirements. The GD00Z ships with a wireless tilt sensor that attaches to the inside of the garage door, which reports ‘open’ or ‘closed’ status to the controller.

Installation Instructions

Brochure

HUSBZ-1 HUSBZ-1 GoControl QuickStick

The GoControl QuickStick is a simple-to-use Z-Wave controller that plugs into your PC computer’s USB port, allowing home automation control of Z-Wave devices using its free smartphone app. The QuickStick devices comes with free PC-based software and a free downloadable app, allowing you to control Z-Wave products from Nortek Security & Control and others. Remote Z-Wave control requires that the associated PC remains powered, turned on and connected to the internet. (If the connected PC reverts to sleep or hibernate mode, Z-Wave remote control capabilities will not function).

Installation Instructions

Brochure

HUSBZB-1 HUSBZB-1 GoControl QuickStick Combo

The GoControl QuickStick Combo is a simple-to-use combination ZigBee & Z-Wave controller that plugs into your PC computer’s USB port, allowing home automation control of ZigBee and Z-Wave devices using its free smartphone app. The QuickStick Combo devices comes with free PC-based software and a free downloadable app, allowing you to control ZigBee and Z-Wave products from Nortek Security & Control and other manufacturers. Remote control requires that the associated PC remains powered, turned on, and internet-connected. (If the connected PC reverts to sleep or hibernate mode, the remote control capabilities will not function).

Installation Instructions

Brochure

GB00Z-2 GB00Z-2 Smart Glass Break Detector

The GoControl Glass Break Sensor (GB00Z-2) offers superior monitoring of glass windows or doors and alerts the homeowner when a break has been detected. Unlike other ‘shock’ - type detectors, which can only be affixed to one single pane of glass, the GoControl Glass Break Sensor can be easily mounted on the wall or ceiling and monitor multiple windows or glass doors within a 12-foot radius of the sensor. Advanced two-stage "thump & crash" detection technology uses acoustic monitoring and analysis to significantly reduce false alarms. The GoControl Glass Break Sensor effortlessly integrates with any Z-Wave hub, app, and other devices to alert homeowners when a glass break event has occurred.

Installation Instructions

Brochure

WF00Z-1 WF00Z-1 GoControl Smart Water Leak Sensor

The GoControl Smart Water Leak Sensor is great for multiple locations in your home - set one by your toilets, water heater, under sinks, and even near water-using appliances like washing machines and dishwasher.

Installation Instructions

Brochure

gc-dbc-1 Doorbell Camera Go Control

GoControl Smart Doorbell Camera is the state-of-the-art video doorbell with weather-proof and hardwired design! See or speak with anyone at your door securely... right from your smartphone app! Anywhere. Anytime. Even at night! Every GoControl Smart Doorbell Camera comes with a smartphone app, available for multiple users and devices. See live video of who is at your door, and have a two-way conversation with your visitor or the delivery person even if you are not home.


Installation Instructions

Brochure

Product Price: $195.62
Gogogate GoGoGate 2 Connects Gates and Garage to Smart phone

GoGoGate2 Remotely operate and monitor your Gate or Garage Doors from your Smartphone, Tablet or PC. Provides Smartphone notifications for garage door / gate events (open, close or left open)
Visual and audio warning system for remote operation
Easy to Install and program (Not Waterproof)
** Not compatible with Liftmaster, Chamberlain or Craftsman MyQ units

Product Price: $89.99
GoGoGate Garage door position sensor GGG2-TWS GoGoGate Garage door position sensor

Wireless sensor ideal for sectional garage doors. Allows you to convienently monitor your garage door status, its temperature and the battery condition. By connecting the wireless sensor to the door, you will receive Smartphone alerts for every garage door event and keep track in a built-in calendar of events.

Product Price: $31.85
   
 

Automate Your Home with products found here

Home automation is so popular right now, we are finally living in that futuristic world that we have see on television for so many years. The products to control your lights, appliances garage door and gates are here and are surprisingly affordable. Many of these products are DIY units that can be installed by your average homeowener with basic mechanical skills. Some of them are actually as simple as screwing in a ligt bulb. You can now easily monitor things like when the kids get home or leave and did they close the garage door when they left and for that matter did you remember to close it. How many times have you been driving down the street when that fear popped into your head and you had to turn around and go back home to check. The new systems will also close the door automatically after a set amount of time.