Official PayPal Seal
Transaction Processing


The GateHouse is an Upfront Merchant on TheFind. Click for info.

(Your shopping cart is empty)
You are here: Home > Gate Operators& Accessories > Elite SL3000 Slide Gate Operators
Sort By:
Page of 1
SL3000ul3-now-UL8
Elite SL3000-UL (now UL8)
Price: $1,709.38

ELITE SL-3000UL Heavy Duty slide gate operator 1/2 HP Now includes built in Liftmaster receiver. Use Liftmaster 893MAX remotes sold separately. Elite SL3000-UL Manual(click here)
E3K-R10K4
Omron E3K-R10K4 Photo eye aka AOMROM
Price: $163.08

Omron Photo Electric Safety Eye E3K-R10K4 Heavy duty, long range (32.8 ft)42-240 vac / 24 240 vdc includes 3" reflector Omron E3K Programming Instructions (click here)
Omron E3K-R10K4  Photo eye mounting bracket
Omron E3K-R10K4 Mounting Bracket
Price: $7.99

Weldable steel mounting plate with drilled and taped holes
weld plate to the post then bolt the Omrons bracket to this plate
it allows you to adjust the eyes alignment easily.
Loop Wire
Loop Wire
Price: $69.99

16 Gauge stranded wire XLPE
Used for loop wires inside concrete / asphalt cuts in driveway.
500 ft spool (actual wire sent may not be blue, display purposes only)
Single conductor copper stranded polyvinyl chloride insulated
Highly resistant to grease, oil and acids.
Loop Sealer
Henry's 305 Asphalt Loop Sealer
Price: $24.99

Loop Sealer - Used for sealing the 1/4 groove in asphalt left after saw cutting loops. Comes in one gallon bottle (similar to milk jug) with pour spout.
Preformed/Preset  Loop
Preformed/Preset Loop
Price: $99.99

Preformed Loop This is a single 4' x 8' loop with a 50' lead in. To be buried in the dirt before driveway in poured. Note: two are required for normal safety loop install
Preformed/Preset  Loop
Preformed/Preset Loop 4 x 12
Price: $149.99

Custom  Preformed Loop This is a single 4' x12' loop with a 50' lead in. To be buried in the dirt before driveway in poured. Note: two are required for normal safety loop install
Allow 5 extra days to process this custom order
SL3000ul1hp_now_ul8
Elite SL3000-UL-1hp now UL8
Price: $2,063.13

ELITE SL-3000-UL-hp Heavy Duty slide gate operator with 2) 1/2 HP motors wired together to produce 1HP Now includes Built in Liftmaster Receiver. Use Liftmaster 893MAX remotes sold separately. Elite SL3000 Manual(click here)
ME120
Miller Edge ME120 5 foot with aluminum mounting channel
Price: $180.59

Miller ME120 5' reversing safety edge with mounting channel 2 wire n/o operation
Custom sizes available upon request for an additional charge

ME120 Specifications(click here)
me120-6
Miller Edge ME120 6 foot with aluminum mounting channel
Price: $189.00

Miller ME120 6' reversing safety edge with mounting channel 2 wire n/o operation
Custom sizes available upon request for an additional charge

ME120 Specifications(click here)
MGS20
Miller Edge MGS20 5 foot for use on 2" square tubing
Price: $186.53

Miller edge mgs20 5' reversing safety edge for use on 2" square tubing 2 wire n/o operation
Custom sizes available upon request for an additional charge

Mgs20 Specifications(click here)
VMD202-5w-100
VMD202 Driveway Sensor Probe
Price: $169.99

EMX VMD202 Driveway Sensor direct burial probe to be used as exit device only.
Newest most advanced probe in their Product line

Installation Manual Link
VMD202-2
VMD202-2 Programmer Only
Price: $22.99

EMX VMD202-2 Programmer only
ETM-17 7 day time clock
Timer 7 day digital EMX ETM-17
Price: $59.40

7 day time clock by EMX
12 Vdc or 24Vac/Vdc
CPS-RPEN4GM
Liftmaster CPS-RPEN4GM Photo Eye
Price: $129.99

MODEL CPS-RPEN4GM
Monitored Retro-Reflective Photo Eye for Gate Operator Applications
RPEN4-RFLCTR
Liftmaster RPEN4-RFLCTR Reflector w/support housing
Price: $18.98

RPEN4-RFLCTR Liftmaster Reflector w/support housing
CPS-OPEN4
Liftmaster CPS-OPEN4
Price: $114.66

CPS-OPEN4
Dual-sided infrared sensors

Maximum range of 45 feet

SL3000ULDM3-now-UL8
Elite SL3000-UL-DM (now UL8)
Price: $2,063.13

ELITE SL-3000-UL-DM Heavy Duty high traffic slide gate operator with 2) 1/2 HP motors wired so one motor opens the gate & the other motor closes the gate.Now includes built in Liftmaster receiver. Use Liftmaster 893MAX remotes sold separately. Elite SL3000 Installation Manual(click here)
DC-2000
Elite DC-2000 Battery Back Up
Price: $411.32

Elite DC-2000 Battery Back Up Power  - back up system to automatically open an Elite SL3000 Slide or CSW200 Swing gate in the event of a power failure. Used on new style Elite operators with omni style control board.

**Note if ordered at same time as operator it will come pre-installed at no additional charge.
DC-1000
Elite DC-1000 Battery Back Up
Price: $411.32

Elite DC-1000 Battery Back Up Power - back up system to automatically open an Elite SL3000 Slide or CSW200 Swing gate in the event of a power failure. Use for older pre omni board systems. Elite dc1000 Programming Instructions (click here)
Liftmaster 371LM
Liftmaster 371LM
Price: $21.75
Sale Price: $15.69

Liftmaster Transmitter Single Button 315 Mhz new style security.
Plus Visor Style Remote with Clip for use with purple learn button on receiver.
371LM Programming Instructions (click here)

Quantity 1-23 24-47 48-71 72-95 96 +
Price $15.69 $15.59 $15.49 $15.29 $14.99

Liftmaster 372LM
Liftmaster 372LM (Replaced by 892LT)
Price: $23.69

Replaced by 892LT click here to view

Liftmaster 372Lm Transmitter
Two Button 315 Mhz New style security.
Plus Visor Style Remote with Clip and battery for use with purple learn button on receiver.

372LM Programming Instructions ( click here)
IG2-K10-E50
Invisi-Guard-2 Through Beam Photo Optic System
Price: $202.49

IG2 thru beam photo optic system sends an invisible beam of light from a transmitting
unit to a receiving unit.
Liftmaster 377LM aka 376LM
Liftmaster 377LM aka 376LM
Price: $37.73
Sale Price: $31.10

Liftmaster 377LM Wireless Keypad Compatible with Security + 315 mhz garage door openers and radio control receivers. Back lit keypad includes 9V battery.
Has flip up cover.originally was model 376 LM it has since been upgraded and now called 377LM.
Replaces Chamberlain models 950D and 956D.
377LM Programming Instructions (click here)
OMNIEXB
Elite OMNIEXB
Price: $44.28

Elite Omni options Board works with Q400 control boards in New Style SL3000, CSW 200 & Hercules Operators. Provides optional connections for 3 button station, stop circuit, electronic locks & alarm contacts
acp17
Fire Access Box with Cable Release
Price: $86.94

Access doors on the front and the back include a hole for a standard or fire department padlock
Pull the interior T-handle to release the gate chain
    - T-handle is connected to a steel cable that runs from the fire box to the release mechanism
    - Release mechanism is located at the rear end of the gate chain
A-ELD
Elite A-ELD plug-in loop detector
Price: $102.06

Elite plug in loop detector for use with Elite Q400 Omni style circuit board only
MGS20-8
Miller Edge MGS20 8 foot for use on 2" square tubing
Price: $229.53

Miller edge mgs20 8' reversing safety edge for use on 2" square tubing 2 wire n/o operation
Custom sizes available upon request for an additional charge

Specifications(click here)
D-TEK
EMX D-TEK Loop Detector
Price: $84.24

EMX Dual Relay Loop Detector 110VAC with harness
Emergency Chain disconnect
Emergency Chain disconnect
Price: $25.99

Emergency chain disconnect - This can be used on any slide gate system to drop the chain to allow the gate to be opened manually
MVP D-TEK
EMX MVP D-TEK Loop Detector
Price: $106.64

The MVP D-TEK® Multi-Voltage Vehicle Detector w/harness
9-240 AC/DC
ULTRA D-TEK
ULTRA D-TEK Plug in Style Vehicle Loop Detector
Price: $70.13

The Ultra D-TEK was designed to be plug-in compatible with Elite’s OmniControl™ board operators such as the SL3000 and CSW200.
The Ultra D-TEK is now compatible with the Viking Loop Detector Rack.
EMX ULT-DIN UltraLoop Detector
EMX ULT-DIN UltraLoop Detector
Price: $134.93

The ULTRALOOP™ Series Vehicle Loop Detectors combine small size with full-featured functionality in a DIN rail mount module.
ULTRA II D-TEK
ULTRA II D-TEK Plug in Style Vehicle Loop Detector
Price: $70.13

ULTRA II D-TEK Plug in Style Vehicle Loop Detector
LH
Loop Detector Wire Harness
Price: $7.99

Wire harness 11 pins/wires  36" in length 20 awg (ul) mtw or awm 600 volt
ld-11
Loop Detector Plug in Socket
Price: $8.99

DIN Rail mountable 11 pin socket base for
                                 use with our loop detectors
50-15514 IR Emitter
50-15514 IR Emitter
Price: $92.11

50-15514 IR Emitter amber led
pc-1
Omron E3K-R10K4 Photo eye cover
Price: $48.86

PC-1 Protective Cover - Clear Plastic Cover for Additional Protection from weather for E3K Omron eye
FAAC 785163 photobeam
FAAC 785163 photobeam
Price: $177.90

FAAC 785163 photobeam reqires wires to both units
FAAC 795163 and 737630 Photobeam Mounting Post and Foundation Plate for Photobeam Set (785163) sold separately
FAAC 795163 and 737630 Photobeam Mounting Post and Foundation Plate for Photobeam Set
Price: $121.50

FAAC 795163 and 737630 Photobeam Mounting Post and Foundation Plate for Photobeam Set (785163) sold separately
NIR
EMX NIR photo eye
Price: $94.84

EMX Photo Safety Eye This is a 24 vac or dc safety eye with reflector and mounting bracket. 30 ft max range
NIR-50
EMX NIR-50
Price: $105.24

The NIR-50 Retro-Reflective Photoeye
can be used as a reversing sensor for commercial overhead doors, gates and parking barriers.
Retro-Reflective Photoeye
1099-50
Multi code 1099-50 coax receiver, mcs109950
Price: $38.92

Multi code Receiver Single Channel Long Range for 12-24 vac or vdc systems.
Replaces 1099-20, 1099-30 & 1099-40 receivers.
Note: Does not include TransformerUse 524 below if needed
Multi code 1099 Installation Instructions (click here)
P-44
EMX P-44 No longer Available use bpe-50
Price: $139.17

No longer available use bpe-50

EMX Thru beam photoelectric sensors This is a 12-24 vac or dc safety eye wall mount requires wiring to both sides. EMX P-44 Installation Instructions (click here)
NIR-HD
EMX NIR Hood
Price: $8.99

Steel hood for NIR and NIR Plus eyes
BPE-50
EMX BPE-50
Price: $94.84

The BPE-50 Battery-Powered Photo Beam system uses 12 -24 VDC/AC on the
transmitter and receiver. The transmitter has the option of using the
two 3.6 Volt batteries for power. The batteries are included.
Multi Code 3022, mcs302210
Multi Code 3022, mcs302210
Price: $74.25

Wireless Transmitter for use with safety edge to provide wireless operation. If it can't be hard wired. Requires a multi code receiver below. Operates on 9 volt battery. 3022 Programming Instructions (click here)
Probe 101
Carsense 101 probe
Price: $249.99

EMX Carsense direct burial probe to be used as exit device only. Select 12 or 24 VAC/VDC  50' or 100'  lead in. separate detector mounts in operator control box for easy adjustment.
Probe-101-wand
Carsense 101 probe (wand only)
Price: $178.74

** Wand only requires detector sold separately**

EMX Carsense direct burial probe to be used as exit device only. 50' or 100' lead in.
separate detector not included in this package mounts in operator control box for easy adjustment.
probe 101 detector
Carsense 101 probe replacement detector only (specify voltage)
Price: $153.99

Replacement detector only for use with Carsense 101 direct burial probe/wand. please indicate desired voltage in comment section of order form
time clock 7 day digital
Timer 7 day digital 26DGI16
Price: $138.51
Sale Price: $107.16

7 day digital time clock 24vac
7 day time clock
Timer 7 day digital EMX DTM-9
Price: $115.13

7 day time clock by EMX
CS202 Probe
Carsense 202 probe
Price: $175.99

EMX Carsense 202 direct burial probe to be used as exit device only. 9-35 VAC/VDC choose from 50' to 150' lead Detector is built into wand and buried.
APRS
Elite APRS House Alarm Proximity switch
Price: $23.22

House Alarm Proximity switch to provide contacts when gate is closed that can be tied into your existing house alarm system.  Requires OMNIEXB board sold separately
Q400 MAU
Q400 MAU maglock relay K74-50276
Price: $44.82

Maglock/Solenoid relay adapter for use with Q400 omni boards
QCC
QCC quick close circuit for use on SL3000 operators with old style Q019
Price: $119.37

QCC quick close circuit for use on SL3000 operators
OCC_Omni
QCC-Omni quick close circuit for use on SL3000 operators with new style Q400 omni boards
Price: $22.14

QCC-Omni quick close circuit for use on SL3000 operators with Omni Q400 board
Note:  Requires Omni-EXB (options ) board also sold separately
ME120-2-6
Miller Edge ME120 2 Ft 6 inches with aluminum mounting channel
Price: $74.12

Miller ME120 2 feet 6 inch custom order reversing safety edge with mounting channel 2 wire n/o operation
Custom sizes available upon request for an additional charge

ME120 Specifications(click here)
   
 
Gatehouse Supplies

 About Us
 Privacy Policy
 Contact Us
 
-->