Transaction Processing
Official PayPal SealThe GateHouse is upfront
(Your shopping cart is empty)
You are here: Home >
Gate Operators
& Accessories
> Elite Miracle Swing Gate Operators
Sort By:
Page of 1  
Liftmaster 370LM
Liftmaster 370LM
Our Price: $22.34

Liftmaster Transmitter Three Button 315 Mhz New style security plus Mini Keychain size remote for use with purple learn button on receiver
Programming Instructions (click here)
Elite MIRACLE-ONE
Elite MIRACLE-ONE
Our Price: $1,041.00

Elite Miracle Residential light duty swing gate operator system.  Telescoping arm, DC motor. Requires adapter if used with solar panel. Now includes built in Liftmaster receiver. Use Liftmaster 371 series remotes sold separately.
Programming Instructions (click here)
Proximity Keypad and card Access Control PRX-320
Proximity Keypad and card Access Control PRX-320 water proof ** (This item is Available )**
Our Price: $169.99

Proximity Keypad and card Access Control PRX-320 water proof (uses carx-20 cards sold separately)
Proximity cards carx20 for prx-320
Proximity Cards for use on prx-320 ** (This item is Available )**
Our Price: $4.99

Proximity cards for use on prx-320 system
Elite MIRACLE-2
Elite MIRACLE-2
Our Price: $1,850.00

ELITE Miracle Master & Slave system for double gates.Includes two arms & one control box. Residential light duty swing gate operator telescoping arm. DC motor Requires Adapter if used with Solar Panel Now includes Built in Liftmaster Receiver. Use Liftmaster 371 series remotes sold separately.
Programming Instructions (click here)
Elite MG1300
Elite MG-1300 Magnetic Lock
Our Price: $299.00

Magnetic Lock Electro magnetic lock 1300 lbs holding force (requires Q240 if used on Miracle system)
Q240
Q240 maglock relay
Our Price: $35.00

Miracle Magnetic lock Module Provides relay/connections to wire a magnetic lock to a miracle gate operator.
Armored door cord K-dla
Armored door cord K-dla
Our Price: $21.99

18" Stainless Steel Armored door loop 1/4 flexable conduit used for getting wires from door/gate to jamb post.
Programming Instructions (click here)
Elite Six Conductor Shielded wire k94-50838
Elite Six Conductor Shielded wire k94-50838
Our Price: $1.76

Wire Six Conductor Shielded wire. Sold by the foot. Suggested for Miracle wiring from control box to each operator
Elite Solar-3
Elite Solar-3
Our Price: $792.00

Solar Panel Elite Solar panel 64 watts 16.5 volts 29.16 x 53.78 inches for use with Robo or Miracle operators. Requires customer to build mounting stand.
Elite Solar-3
Evergreen 115 watt solar panel
Our Price: $686.50

Solar Panel Elite Solar panel 64 watts 16.5 volts 29.16 x 53.78 inches for use with Robo or Miracle operators. Requires customer to build mounting stand.
A-Solar-ADP
A-Solar-ADP solar adaptor for Miracle operators
Our Price: $99.00

Solar Adapter Allows Miracle operators to operator from solar panel
aluminum mounting channel only for me120 edge  5' length
5 foot replacement aluminum mounting channel only for me120 or mgo20 edges
Our Price: $19.99

5 foot replacement aluminum mounting channel only for me120 or mgo20  edges
Liftmaster 371LM
Liftmaster 371LM
Our Price: $15.79

Liftmaster Transmitter Single Button 315 Mhz New style security plus Visor Style Remote with Clip for use with purple learn button on receiver
Programming Instructions (click here)
Liftmaster 372LM
Liftmaster 372LM
Our Price: $21.15

Liftmaster 372Lm Transmitter Two Button 315 Mhz New style security plus Visor Style Remote with Clip and battery  for use with purple learn button on receiver
Programming Instructions (click here)
Miller Edge ME120 5 foot with aluminum mounting channel
Miller Edge ME120 5 foot with aluminum mounting channel
Our Price: $112.99

Miller ME120 5' reversing safety edge with mounting channel 2 wire n/o operation
Custome sizes available upon request for an additional charge

Specifications(click here)
Liftmaster 379LM
Liftmaster 379LM-10
Our Price: $58.99



Works with all 300 series 315 mhz liftmaster systems with purple learn button holds ten unique users

Uses Security + with rolling code technology transmits new code every time

 

Easy to install two screws, no wires

Wireless battery operated includes four AAA batteries 

Weatherproof

Programs in four easy steps

Programming Instructions (click here)
Liftmaster 377LM aka 376LM
Liftmaster 377LM aka 376LM
Our Price: $31.99

Liftmaster 377LM Wireless Keypad Compatible with Security + 315 mhz garage door openers and radio control receivers. Back lit keypad includes 9V battery. Has flip up cover.originally was model 376 LM it has since been upgraded and now called 377LM Replaces Chamberlain models 950D and 956D
Programming Instructions (click here)
Miller Edge MGS20
Miller Edge MGS20 5 foot for use on 2" square tubing
Our Price: $124.99

Milleredge mgs20 5' reversing safety edge for use on 2" square tubing 2 wire n/o operation
Custome sizes available upon request for an additional charge

Specifications(click here)
Wire,scrap wire, short wire, project wire
Loop Detector Wire Harness
Our Price: $7.99

Wire harness 11 pins/wires  36" in length 20 awg (ul) mtw or awm 600 volt
emx loop detector lp-d-tek
EMX low power dtek detector 12-24 ac/dc low power draw
Our Price: $89.99

EMX loop detector lp-d-tek Low Voltage Loop Detector w/harness for use with Miracle or Robo Operators
Preformed/Preset  Loop
Preformed/Preset Loop
Our Price: $99.99

Preformed Loop This is a single 4' x 8' loop with a 50' lead in. To be burried in the dirt before driveway in poured. Note: two are required for normal safety loop install
Loop Wire
Loop Wire
Our Price: $87.99

16 Gauge stranded wire - Used for loop wires inside concrete / asphalt cuts in driveway. 500 ft spool (actual wire sent may not be blue, display purposes only)
Henry's 305 Asphalt Loop Sealer
Henry's 305 Asphalt Loop Sealer
Our Price: $19.99

Loop Sealer - Used for sealing the 1/4 groove in asphalt left after saw cutting loops. Comes in one gallon bottle (similar to milk jug) with pour spout.
Omron E3K-R10K4  Photo eye
Omron E3K-R10K4 Photo eye aka AOMROM
Our Price: $180.35

Omron Photo Electric Safety Eye E3K-R10K4  Heavy duty, long range (32.8 ft)42-240 vac / 24 240 vdc includes 3" reflector
Programming Instructions (click here)
50-15514 IR Emitter
50-15514 IR Emitter
Our Price: $76.99

50-15514 IR Emitter
Omron Photo eye E3K-R10K4 cover
Omron E3K-R10K4 Photo eye cover
Our Price: $43.85

PC-1 Protective Cover - Clear PlasticCover for Additional Protection from weather for E3K Omron eye
FAAC 785163 photobeam
FAAC 785163 photobeam
Our Price: $165.99

FAAC 785163 photobeam reqires wires to both units
FAAC 795163 and 737630 Photobeam Mounting Post and Foundation Plate for Photobeam Set (785163) sold separately
FAAC 795163 and 737630 Photobeam Mounting Post and Foundation Plate for Photobeam Set
Our Price: $121.50

FAAC 795163 and 737630 Photobeam Mounting Post and Foundation Plate for Photobeam Set (785163) sold separately
EMX NIR photo eye
EMX NIR photo eye
Our Price: $110.91

EMX Photo Safety Eye This is a 24 vac or dc safety eye with reflector and mounting bracket.
EMX P-44 Thru Beam Photoelectric Sensor
EMX P-44
Our Price: $139.17

EMX Thru beam photoelectric sensors This is a 12-24 vac or dc safety eye wall mount requires wiring to both sides.
Programming Instructions (click here)
Carsense 101 probe
Carsense 101 probe
Our Price: $249.99

Carsense direct burial probe to be used as exit device only. Select 12 or 24 VAC/VDC  50' or 100'  lead in. separate detector mounts in operator control box for easy adjustment.
Carsense 101 probe
Carsense 101 probe replacement detector only (specify voltage)
Our Price: $153.99

Replacement detector only for use with Carsense 101 direct burial probe/wand. please indicate desired voltage in comment section of order form
7 day time clock
Timer 7 day digital EMX DTM-9
Our Price: $114.99

7 day time clock by EMX
time clock 7 day digital
Timer 7 day digital 26DGI16
Our Price: $199.99

7 day digital time clock 24vac
Carsense 202 probe
Carsense 202 probe
Our Price: $279.99

Carsense 202 direct burial probe to be used as exit device only. 9-35 VAC/VDC choose from 50' to 150' lead Detector is built into wand and burried.
Multi code 1099-50 coax receiver, mcs109950
Multi code 1099-50 coax receiver, mcs109950
Our Price: $38.92

Multi code Receiver Single Channel Long Range for 12-24 vac or vdc systems Replaces 1099-20, 1099-30 & 1099-40 receivers Note: Does not include TransformerUse 524 below if needed
Programming Instructions (click here)
Multi Code 3022, mcs302210
Multi Code 3022, mcs302210
Our Price: $74.25

Wireless Transmitter for use with safety edge to provide wireless operation. If it can't be hard wired. Requires a multi code receiver below. Operates on 9 volt battery.
Programming Instructions (click here)
   
 
Gatehouse Supplies

 About Us
 Privacy Policy
 Contact Us