|
|
|
|
|
|
Liftmaster 370LM
|
Our Price: $22.34
|
|
|
Liftmaster Transmitter Three Button 315 Mhz New style security plus Mini Keychain size remote for use with purple learn button on receiver
Programming Instructions (click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
Elite CSW200-UL
|
|
Our Price: $1,696.00
|
|
|
ELITE CSW200-UL Heavy Duty swing gate operator 1/2 HP. Now includes built in Liftmaster receiver. Use Liftmaster 371 series remotes sold separately
Manual(click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
Elite CSW200-DM dual motor swing gate operator
|
|
Our Price: $1,946.00
|
|
|
ELITE CSW200-UL-DM Heavy Duty high traffic swing gate operator with 2) 1/2 HP motors wired so one motor opens the gate & the other motor closes the gate. Now includes built in Liftmaster receiver. Use Liftmaster 371 series remotes sold separately. Spec. Sheet
Manual(click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
Elite CSW200-UL-1 1HP Operator
|
|
Our Price: $1,946.00
|
|
|
ELITE CSW200-UL-1 Heavy Duty swing gate operator with 2) 1/2 HP motors wired together to produce 1HP. Now includes built in Liftmaster receiver. Use Liftmaster 371 series remotes sold separately
Manual(click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
Elite DC-2000 Battery Back Up
|
|
Our Price: $389.00
|
|
|
Elite DC-2000 Battery Back Up Power - back up system to automatically open an Elite SL3000 Slide or CSW200 Swing gate in the event of a power failure. Used on new style Elite operators with omni style control board.
**Note if ordered at same time as operator it will come pre-installed at no additional charge.
|
|
|
|
|
|
|
|
|
|
|
|
|
Elite DC-1000 Battery Back Up
|
|
Our Price: $389.00
|
|
|
Elite DC-1000 Battery Back Up Power - back up system to automatically open an Elite SL3000 Slide or CSW200 Swing gate in the event of a power failure. Use for older pre omni board systems.
Programming Instructions (click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
Elite MG-1300 Magnetic Lock
|
|
Our Price: $299.00
|
|
|
Magnetic Lock Electro magnetic lock 1300 lbs holding force (requires Q240 if used on Miracle system)
|
|
|
|
|
|
|
|
|
|
|
|
|
Armored door cord K-dla
|
|
Our Price: $21.99
|
|
|
18" Stainless Steel Armored door loop 1/4 flexable conduit used for getting wires from door/gate to jamb post.
Programming Instructions (click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
5 foot replacement aluminum mounting channel only for me120 or mgo20 edges
|
|
Our Price: $19.99
|
|
|
5 foot replacement aluminum mounting channel only for me120 or mgo20 edges
|
|
|
|
|
|
|
|
|
|
|
|
|
Liftmaster 371LM
|
|
Our Price: $15.79
|
|
|
Liftmaster Transmitter Single Button 315 Mhz New style security plus Visor Style Remote with Clip for use with purple learn button on receiver
Programming Instructions (click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
Liftmaster 372LM
|
|
Our Price: $21.15
|
|
|
Liftmaster 372Lm Transmitter Two Button 315 Mhz New style security plus Visor Style Remote with Clip and battery for use with purple learn button on receiver
Programming Instructions (click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
Miller Edge ME120 5 foot with aluminum mounting channel
|
|
Our Price: $112.99
|
|
|
Miller ME120 5' reversing safety edge with mounting channel 2 wire n/o operation Custome sizes available upon request for an additional charge
Specifications(click here) |
|
|
|
|
|
|
|
|
|
|
|
|
Liftmaster 379LM-10
|
|
Our Price: $58.99
|
|
|
Works with all 300 series 315 mhz liftmaster systems with purple learn button holds ten unique users
Uses Security + with rolling code technology transmits new code every time
Easy to install two screws, no wires
Wireless battery operated includes four AAA batteries
Weatherproof
Programs in four easy steps
Programming Instructions (click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
Liftmaster 377LM aka 376LM
|
|
Our Price: $31.99
|
|
|
Liftmaster 377LM Wireless Keypad Compatible with Security + 315 mhz garage door openers and radio control receivers. Back lit keypad includes 9V battery. Has flip up cover.originally was model 376 LM it has since been upgraded and now called 377LM Replaces Chamberlain models 950D and 956D
Programming Instructions (click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
Elite OMNIEXB
|
|
Our Price: $47.99
|
|
|
Elite Omni options Board works with Q400 control boards in New Style SL3000, CSW 200 & Hercules Operators. Provides optional connections for 3 button station, stop circuit, electronic locks & alarm contacts
|
|
|
|
|
|
|
|
|
|
|
|
|
Miller Edge MGS20 5 foot for use on 2" square tubing
|
|
Our Price: $124.99
|
|
|
Milleredge mgs20 5' reversing safety edge for use on 2" square tubing 2 wire n/o operation Custome sizes available upon request for an additional charge
Specifications(click here) |
|
|
|
|
|
|
|
|
|
|
|
|
Elite A-ELD plug-in loop detector
|
|
Our Price: $96.12
|
|
|
Elite plug in loop detector for use with Elite Q400 Omni style circuit board only
|
|
|
|
|
|
|
|
|
|
|
|
|
EMX D-TEK Loop Detector
|
|
Our Price: $89.99
|
|
|
EMX Dual Relay Loop Detector 110VAC with harness
|
|
|
|
|
|
|
|
|
|
|
|
|
Loop Detector Wire Harness
|
|
Our Price: $7.99
|
|
|
Wire harness 11 pins/wires 36" in length 20 awg (ul) mtw or awm 600 volt
|
|
|
|
|
|
|
|
|
|
|
|
|
Preformed/Preset Loop
|
|
Our Price: $99.99
|
|
|
Preformed Loop This is a single 4' x 8' loop with a 50' lead in. To be burried in the dirt before driveway in poured. Note: two are required for normal safety loop install
|
|
|
|
|
|
|
|
|
|
|
|
|
Loop Wire
|
|
Our Price: $87.99
|
|
|
16 Gauge stranded wire - Used for loop wires inside concrete / asphalt cuts in driveway. 500 ft spool (actual wire sent may not be blue, display purposes only)
|
|
|
|
|
|
|
|
|
|
|
|
|
Henry's 305 Asphalt Loop Sealer
|
|
Our Price: $19.99
|
|
|
Loop Sealer - Used for sealing the 1/4 groove in asphalt left after saw cutting loops. Comes in one gallon bottle (similar to milk jug) with pour spout.
|
|
|
|
|
|
|
|
|
|
|
|
|
Omron E3K-R10K4 Photo eye aka AOMROM
|
|
Our Price: $180.35
|
|
|
Omron Photo Electric Safety Eye E3K-R10K4 Heavy duty, long range (32.8 ft)42-240 vac / 24 240 vdc includes 3" reflector
Programming Instructions (click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
50-15514 IR Emitter
|
|
Our Price: $76.99
|
|
|
50-15514 IR Emitter
|
|
|
|
|
|
|
|
|
|
|
|
|
Omron E3K-R10K4 Photo eye cover
|
|
Our Price: $43.85
|
|
|
PC-1 Protective Cover - Clear PlasticCover for Additional Protection from weather for E3K Omron eye
|
|
|
|
|
|
|
|
|
|
|
|
|
FAAC 785163 photobeam
|
|
Our Price: $165.99
|
|
|
FAAC 785163 photobeam reqires wires to both units
|
|
|
|
|
|
|
|
|
|
|
|
|
FAAC 795163 and 737630 Photobeam Mounting Post and Foundation Plate for Photobeam Set
|
|
Our Price: $121.50
|
|
|
FAAC 795163 and 737630 Photobeam Mounting Post and Foundation Plate for Photobeam Set (785163) sold separately
|
|
|
|
|
|
|
|
|
|
|
|
|
EMX NIR photo eye
|
|
Our Price: $110.91
|
|
|
EMX Photo Safety Eye This is a 24 vac or dc safety eye with reflector and mounting bracket.
|
|
|
|
|
|
|
|
|
|
|
|
|
EMX P-44
|
|
Our Price: $139.17
|
|
|
EMX Thru beam photoelectric sensors This is a 12-24 vac or dc safety eye wall mount requires wiring to both sides.
Programming Instructions (click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
Carsense 101 probe
|
|
Our Price: $249.99
|
|
|
Carsense direct burial probe to be used as exit device only. Select 12 or 24 VAC/VDC 50' or 100' lead in. separate detector mounts in operator control box for easy adjustment.
|
|
|
|
|
|
|
|
|
|
|
|
|
Carsense 101 probe replacement detector only (specify voltage)
|
|
Our Price: $153.99
|
|
|
Replacement detector only for use with Carsense 101 direct burial probe/wand. please indicate desired voltage in comment section of order form
|
|
|
|
|
|
|
|
|
|
|
|
|
Timer 7 day digital 26DGI16
|
|
Our Price: $199.99
|
|
|
7 day digital time clock 24vac
|
|
|
|
|
|
|
|
|
|
|
|
|
Carsense 202 probe
|
|
Our Price: $279.99
|
|
|
Carsense 202 direct burial probe to be used as exit device only. 9-35 VAC/VDC choose from 50' to 150' lead Detector is built into wand and burried.
|
|
|
|
|
|
|
|
|
|
|
|
|
Timer 7 day digital EMX DTM-9
|
|
Our Price: $114.99
|
|
|
7 day time clock by EMX
|
|
|
|
|
|
|
|
|
|
|
|
|
Multi code 1099-50 coax receiver, mcs109950
|
|
Our Price: $38.92
|
|
|
Multi code Receiver Single Channel Long Range for 12-24 vac or vdc systems Replaces 1099-20, 1099-30 & 1099-40 receivers Note: Does not include TransformerUse 524 below if needed
Programming Instructions (click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
Multi Code 3022, mcs302210
|
|
Our Price: $74.25
|
|
|
Wireless Transmitter for use with safety edge to provide wireless operation. If it can't be hard wired. Requires a multi code receiver below. Operates on 9 volt battery.
Programming Instructions (click here)
|
|
|
|
|
|
|
|
|
|
|
|
|
Elite APRS House Alarm Proximity switch
|
|
Our Price: $20.52
|
|
|
House Alarm Proximity switch to provide contacts when gate is closed that can be tied into your existing house alarm system. Requires OMNIEXB board sold separately
|
|
|
|
|
|
|
|
|
|
|
|
|
Q400 MAU maglock relay
|
|
Our Price: $40.05
|
|
|
Maglock/Solenoid relay adapter for use with Q400 omni boards
|
|
|
|
|
|
|
|
|
|
|
|
|
Hub lock for CSW 200
|
|
Our Price: $24.99
|
|
|
CSW200 Hub Cover Lock - This device is inserted into hole in top output shaft of the CSW 200 operator. It locks the stainless steel cover over the hub so people can't access release lever
|
|
|
|
|
|
|
