View CartMy Account / Order StatusHelp





Transaction Processing
Official PayPal Seal
(Your shopping cart contains 1 item priced at $59.99) View My Cart

  Home > Remote Controls > Genie >

  Genie 12 switch MAT-90 mini keychain
  Genie MAT-90
genie mat-90
 
Our Price: $16.37


Product Code: MAT 90

Description
 
Genie MAT-90 intelicode compatible
Dimensions: 3.25 x 1.25 x .5 inches
 
Features
  • GENIE GARAGE DOOR OPENER MINI REMOTE

  • MAT90 ( 12 Switch & 390 frequency)



  • ************* WARNING *************
  • Moving Door can cause serious injury or death.

  • · DO NOT install transmitter unless the door operator’s safety reverse works as required by the door operator’s manual.

  • · Wall control must be mounted in sight of door, at least 5 feet above floor and clear of moving door parts.

  • · Keep people clear of opening while door is moving.

  • · DO NOT allow children to play with the transmitter or door operator.

  • If safety reverse does not work properly:

  • · Close door then disconnect operator using the manual release handle.

  • · DO NOT use transmitter or door operator.

  • · Refer to Door and Door Operators Owner’s Manuals before attempting any repairs.

  • _________________________________________________



  • Electrical Shock can cause serious injury or death.

  • · Power cord must be unplugged before attaching any wires,

  • · Be sure wire ends do not touch each other or other terminals.

  • If you have questions or if you need a manual, contact the distributor or manufacturer of the operator.

  • ******************************************************************************************************************************

  • MAT – 90 DOOR OPENER REMOTE CONTROLLER

  • NOTICE: THIS REMOTE CONTROLLER MUST HAVE ITS INTERNAL CODE SWITCHES SET TO BE IDENTICAL TO THOSE IN YOUR OPENER BEFORE IT WILL WORK.

  • Your code block with dip switches can be found where you see the antenna wire hanging from the motor head (you may have to take the lens cover off). If antenna wire is not hanging from motor head then you have an external receiver which is a black box approx. 6" x 2" mounted somewhere in the garage with a antenna wire hanging from it (pop off cover to find code block with dip switches).

  • (This private code makes it possible for your remote controller to operate your door but not your neighbor’s. It also prevents his controller form operating your door.)

  • HOW TO SET YOUR PERSONAL ACCESS CODE
  • 1. Put the edge of a coin in the slot to separate the front from the back of the controller and pry open the case to expose the twelve code switches.

  • 2. Using the tip of a ballpoint pen as a tool set these code switches to the same positions as those in the original controller. NOTE: If your original controller had punch-out keys instead of switches, then set the switches in your new controller to the OFF or DOWN position to correspond with the keys which were punched out in the original controller. (Slide the switch actuator tab completely from one end of the slot to the other to change switch settings.)

  • 3. If the original controller is not available, you may obtain the correct positions from the receiver code switches at the door opener power unit (motor head) Close the garage door and disconnect the electrical power from the door opener. If the door opener has a front lens, remove it to expose the switches.)

  • 4. Copy the settings of these receiver switches as specified in Step 2 being careful to match the switch numbers.

  • 5. Snap the controller case together, replace the door opener lens, and reconnect electrical power to the door opener.

Related Products...
Genie GPT90-3 Genie git visor clip Genie Intelicode Wireless keypad GWKP Genie GCT-3
Our Price: $26.60
Add
Our Price: $5.00
Add
Our Price: $4.99
Add
Our Price: $26.99
Add
Genie GPT90-3 Genie git visor clip Genie Intelicode Wireless keypad GWKP Genie GCT-3
Genie Intelicode Wireless keypad GWKP Genie GR390-12 Genie GT912 Genie GIC-390 Intelicode receiver
Our Price: $4.99
Add
Our Price: $48.99
Add
Our Price: $21.42
Add
Our Price: $47.99
Add
Genie Intelicode Wireless keypad GWKP Genie GR390-12 Genie GT912 Genie GIC-390 Intelicode receiver

Average Customer Review: Based on 1 Reviews. Write a review.

  0 of 0 people found the following review helpful:
 
Thanks October 28, 2009
Reviewer: Paul E from Carpinteria, CA United States  
I recently ordered two items and they arrived sooner than I thought.  Your prices are very good.  It is good doing business with you.

Was this review helpful to you?


Browse for more products in the same category as this item:

Remote Controls > Genie


 
rd
Gatehouse Supplies

 About Us
 Privacy Policy
 Contact Us